CR Magnetics CR4810-250 电流传感器，实芯

A variety of inputs and ouputs are available to satisfy any application

35mm DIN Rail or Panel Mount

Available with 0 – 5 Vdc or 4 – 20 mA DC outputs

Highest precision available

Connection diagram printed on case

CR4100 Series

The CR4100 Series true RMS Current Transducers and Transmitters are designed for applications where AC current waveforms are not purely sinusoidal. More precise and accurate than other transducers, these devices are ideal in chopped wave and phase fired control systems.

CR4200 Series

The CR4200 Series, Current Transmitters produce a calibrated 4-20 mA DC signal that is proportional to the average RMS input AC current. Designed for multi-point current sensing, these devices provide excellent features in a high value package. The output signal is generated from a user supplied 24 Vdc power supply within the output current loop.

CR4400 Series

The CR4400 Series, Average RMS Voltage Transducers and Transmitters are designed to provide a DC output proportional to the AC current input. These devices are best suited for general applications, such as fixed frequency voltage supplies.

CR4500 Series

The CR4500 Series, true RMS Voltage Transducers and Transmitters are designed for applications where AC voltage waveforms are not purely sinusoidal. More precise and accurate than other devices, these units are ideal in chopped wave and phase fired control systems.

CR4800 Series

The CR4800 Series, Average RMS Voltage Transducers and Transmitters are designed to provide a DC output proportional to the AC voltage input. These devices are best suited for general applications, such as fixed frequency voltage supplies.

CR5200 Series

The CR5200 Series, DC Current Transducers are designed to provide a DC signal which is proportional to a DC sensed current. These devices are designed for direct current only, targeting them towards general and daily applications. The ranges 2 to 10 Amp utilize an advanced Magnetic Modulator technology and the ranges 20 amps and above utilize Hall Effect technology.

CR5400 Series

The CR5400 Series, AC/DC Hall Effect Current Transducers, are designed to provide a bipolar output that proportionally reflects (traces) the waveform of the input current. These devices are specifically targeted to be used in applications where multi-mode current sensing is required.

Specifications

Product Type Transducers

Description 4810 Series

Basic Accuracy 0.5% and 1.0% available

Brand CR Magnetics

Model CR4810-250

Manufacturer number CR4810-250

可满足任何应用程序的各种投入和OUPUTS

35mm DIN导轨或面板安装

0 – 5 Vdc或4 – 20 mA直流输出

精度最高可

接线图上印情况

CR4100系列

CR4100系列真有效值电流传感器和变送器的设计应用交流电流波形并非纯粹的正弦。更精确和准确的比其他传感器，这些设备都是理想的斩波和相位发射控制系统。CR4200系列 CR4200系列电流变送器产生一个校准4-20 mA直流信号，即是平均有效值AC输入电流成正比。专为多点电流检测，这些设备提供高价值包的优良特性。用户提供的系列CR4400 CR4400系列，平均RMS电压传感器和变送器旨在提供交流电流输入成正比的直流输出24伏直流电源输出电流回路内产生输出信号。这些设备是最适合一般的应用，如固定频率电压电源系列CR4500 CR4500系列，真有效值电压传感器和变送器的设计应用交流电压波形并非纯粹的正弦。比其他设备更精确和准确的发射控制系统系列CR4800 CR4800系列，平均RMS电压传感器和变送器旨在提供成正比的直流输出的交流电压输入，这些单位是理想的斩波和相位。这些器件最适合于一般的应用程序，如固定频率的电压供应。CR5200系列CR5200系列，直流电流转换器的目的是提供一个直流信号，该信号是成正比的DC感应电流。这些设备是专为直流，针对他们对一般及日常应用。利用先进的磁调制技术的范围2至10安培范围为20安培以上，利用霍尔效应技术。CR5400 CR5400系列系列，AC / DC霍尔效应电流传感器，旨在提供一个双极输出比例反映（痕迹），输入电流的波形。这些设备是专门针对需要多模电流检测是在应用程序中要使用的。

产品规格

产品类型 传感器

描述 4810系列

基本准确度 0.5％和1.0％的可

牌 CR磁

模型 CR4810-250

制造商数量 CR4810-250