Etatron DLXB PH / ORP泵控制系统，1升/小时，最大15巴的压力，脚安装，115伏交流

Etatron DLXB pH/ORP Pump Control System, 1 L/hr, 15 bar max pressure, foot-mount, 115 VAC

综合了控制器和计量泵，简化了系统设置

控制系统能接受的pH或ORP电极更加方便

开/关或比例控制模式允许强大的过程控制

集成控制器和计量泵控制过程pH或ORP液位节省您的时间，金钱和空间。这些电磁驱动隔膜计量泵和控制器由耐酸塑料外壳包裹着防护等级IP65。聚丙烯泵头手动排气，PTFE隔膜，和Viton®防潮。泵控制系统接受液位转换器（单独订购）。背光LCD显示屏的分辨率为0.01 pH或1毫伏。

控制器是可切换开/关或比例控制应用，并具有手动温度补偿。控制可切换迟滞和延时功能，可以微调。注射频率可在0-100％之间切换，最大抽水流速。

控制系统接受BNC连接器电极没有温度补偿 单独订购电极

齐全规格见说明书

包含： 6英尺（1.8米）长透明PVC和PE（3/16″ID×1/4″OD）加权滤波器，和6英尺（1.8米）的美国标准电源线。

Integrated controller and metering pump simplify system setup

Control systems are able to accept pH or ORP electrodes for added convenience

On/off or proportional control modes allow for robust process control

Control the pH or ORP levels of your process with an integrated controller and pump—saves you time, money, and space. These solenoid-driven, diaphragm metering pumps and controllers are encased with an IP65, acid-resistant plastic housing. Polypropylene pump heads have manual air bleed, PTFE diaphragm, and Viton® wetted parts. Pump control systems accept level switches (order separately). Backlit LCD display has resolution of 0.01 pH or 1 mV.

Controllers are programmable for on/off or proportional control applications and have manual temperature compensation. Control can be fine-tuned by programmable hysteresis and delay functions. Frequency of injections is programmable between 0 to 100% of the maximum flow rate of the pump.

Control systems accept electrodes with BNC connectors and no temperature compensation; order electrodes separately.

See instruction manual for complete specifications

What’s Included:

6-ft (1.8-m) length of both clear PVC and PE tubing (3⁄16″ ID x 1⁄4″ OD), weighted filter, and 6-ft (1.8-m) U.S. standard power cord.