Oakton 2700台式PH计，电极臂和可溯源至NIST校准

Oakton pH 2700 Benchtop Meter with electrode arm and NIST-traceable Calibration

经济实惠仪表，符合GLP要求！

超大，信息显示屏，明亮的背景

高0.001 pH分辨率精度为±0.002 pH

储存，调用多达500组数据，可将数据发送到PC或打印机

OAKTON 2700仪表，符合GLP要求，仪表啜印所有的校准和存储数据的时间/日期。非易失性存储器可存储多达500个数据集，以简化记录大量的pH或mV测量。仪表自动计算并显示电极的斜率和偏移，适合电极质量检测。单独订购RS-232和RS-232可选USB适配器。

高级设置选项允许用户定制很大程度。为方便连续监测仪表，数据采集时间间隔可以被编辑。可编程限位报警，当读数超出范围时会提醒您。6点PH校准，美国，NIST，DIN，或自定义缓冲集。可选密码保护，防止更改仪器设置和校准。

超大3-1/4“×2-7/16”（8.3×6.2厘米）图形液晶，整个房间都可查看。背光明亮和大数据任何条件下都可查看。信息显示屏显示pH值或氧化还原测量温度，电极状态，校准点，时间和日期！预定校正日期报警让您知道什么时候需要重新校准测量精度。视觉稳定性指示通知您，测量稳定，不用推测。全面的自我诊断功能使故障排除变得轻而易举。

包含：电极支架和100/240 VAC电源适配器。

仪表探头： ATC探头35613-13 35805-04 pH电极，60毫升电极填充液。

详细规格请看说明书。

Affordable meters that meet GLP requirements!

Oversize, informative display with bright backlight

High 0.001 pH resolution with ±0.002 pH accuracy

Store and recall up to 500 sets of data—send data to a PC or printer

Oakton 2700 meters meet GLP requirements—meters stamp all calibration and stored data with time/date. Nonvolatile memory stores up to 500 data sets to simplify documenting large volumes of pH or mV measurements. Meters automatically calculate and display electrode slope and offset—ideal for checking electrode quality. Order RS-232 and optional RS-232 to USB adapter separately.

Advanced set-up options allow for a large degree of user customization. Datalogging intervals can be programmed into the meter for convenient continuous monitoring. Programmable limit alarm alerts you when readings fall out of range. Calibrate up to 6 points for pH using USA, NIST, DIN, or custom buffer sets. Optional password protection prevents changes to meter setup and calibration.

Oversized 3-1/4″ x 2-7/16″ (8.3 x 6.2 cm) graphic LCD can be viewed from across the room. Bright backlight and large digits allow readings in all conditions. Informative display shows pH or Redox measurements together with temperature, electrode status, cal points, time and date all at once! Cal-due alarm lets you know when recalibration is necessary for measurement accuracy. Visual stability indicator informs you when measurements have stabilized, eliminating guesswork. Comprehensive self-diagnostics make troubleshooting a breeze. 

What’s Included:

electrode stand and 100/240 VAC power adapter.

Meters with probes add: ATC probe 35613-13, pH electrode 35805-04, and 60-mL of electrode fill solution.

For full specifications please refer to the instruction manual