Oakton CON 110手持式电导率/ TDS米NIST可溯源校准套件

Oakton CON 110 handheld conductivity/TDS meter kit with NIST-traceable Calibrations

多性能-作为台式实验室仪表或手持式多功能一体机使用

存储和调用多达100个测量值°C或°F温度

RS-232输出和免费PC数据记录辅助软件允许您将数据导入到现行的电子表格程序

自动温度补偿（ATC）校正由于导电性的变化而产生的溶液的温度变化。

自动量程选择正确的最佳分辨率，最快速响应。

双液晶显示器，可以让你查??看电导率（TDS）和温度。

CON 110具有双行LCD，允许电导率或TDS和温度的同时观看。仪表可以选择手动和自动温度补偿（ATC）正确的价值观之间，甚至改变溶液温度。标准化温度和温度系数也可定制。可选择自动量程功能选择正确的范围，最好的分辨率和最快的响应。校准仪表，用一个单一的或更大的线性多点校准。从编程的标准值，校准点可以自动选择或手动输入值的特定的应用。可选择的电池常数0.1，1.0，10.0和可调的TDS转换系数在0.4到1.0之间，可以设置准确和精确的测量，从单纯的应用水至200毫解。使用内置看台台式操作或使用电池供电的手持式现场操作。仪表运行长达200小时的单组电池，并具有可选择的自动关闭功能，不用仪表，20分钟后自动关闭。选择存储和现场运行操作仪表套件。

包含：

仪表包括：数据记录辅助电脑软件，电导池35608-50和电池。

仪表套件包括：数据记录协助电脑软件，电导池35608-50校准液袋（各四个447 uS, 1413 uS, 2764 uS, and 15,000 uS），四冲洗袋，取样瓶，电池和硬盘，手提箱。

Multifunctional—use as a benchtop laboratory meter or as a handheld in the field

Store and recall up to 100 measurements with °C or °F temperature

RS-232 output and FREE PC Datalog Assist Software allow you to import data into popular spreadsheet programs

Automatic temperature compensation (ATC) corrects changes in conductivity due to temperature changes of the solution.

Auto-ranging selects the right range for best resolution and fastest response.

Dual LCD lets you view conductivity (or TDS) and temperature.

The CON 110 features dual-line LCD that allows viewing of conductivity or TDS and temperature simultaneously. Meter allows selection between manual and automatic temperature compensation (ATC) for correct values, even with changing solution temperatures. Normalization temperature and temperature coefficients are also customizable.

Selectable auto-ranging function selects the correct range for best resolution and fastest response. Calibrate the meters with a single or multi-point calibration for greater linearity. Calibration points can be automatically selected from programmed standard values or manually entered values specific for the application.

Selectable cell constants of 0.1, 1.0, or 10.0 and adjustable TDS conversion factors between 0.4 to 1.0 can be set for accurate and precise measurements in applications from pure water to solutions up to 200 mS. Use the built-in stands for benchtop operation or use battery power for handheld field operation. Meters operate up to 200 hours on a single set of batteries and have a selectable auto-off function that shuts down the meter after 20 minutes of nonuse. Select meter kits for storage and field operation.

What’s Included:

Meter includes: Datalog Assist PC software, conductivity cell 35608-50 and batteries.

Meter kit includes: Datalog Assist PC softward, conductivity cell 35608-50, calibration solution pouches (four each of 447 uS, 1413 uS, 2764 uS, and 15,000 uS), four rinse pouches, sample bottles, batteries, and hard side carrying case.