Oakton PC700仪表/ pH电极，电导率/温度探头，电极支架和NIST校准

Oakton PC700 Meter w/pH electrode, conductivity/temp probe, electrode stand and NIST-traceable Calibration

一键测量，轻松切换PH,mV，电导率，TDS,和温度

节省空间设计相较于工作台上的其他仪表占用空间更小

大显示屏可以让你从实验室外测量

每次测量时电导率和TDS自动量程助您选择最佳分辨率

PC700仪表提供了一种新的紧凑型设计，40％以上小于其他台式仪表。大显示屏在远处也易于阅读。双显示器同时读取测量参数和温度，使其一目了然。该仪器具有美国和NIST缓冲套pH值自动缓冲识别（1.68，4.01，7.00，10.01和12.45，1.68，4.01，6.18，9.86，12.45），自动或手动温度补偿，温度可选°F或°C，显示保持，防水的键盘。

前校准点，电极的斜率和偏移，电导率/ TDS电池常数存储在内存中快速方便地检索。您还可以存储100个数据集在仪表的内存，以供日后检索。方便快速拔出参考卡，指尖按键。

包含：通用100/240伏电源，电源适配器，电极支架

仪表探头增加：复合pH电极（35805-04）和电导率/温度探头（35608-74）。

Easily toggle between pH, mV, conductivity, TDS, and temperature measurements at the touch of a button

Space-saving design takes up less room on the bench than other meters

Large display lets you see your measurements from across the lab

Conductivity and TDS autoranging chooses the best resolution for each measurement

The PC700 meter offers a new compact design that is over 40% smaller than other benchtop meters. The large display is easy to read even at a distance. Dual-display allows you to read both a measured parameter and temperature at a glance. The meter features pH auto-buffer recognition for both USA and NIST buffer sets (1.68, 4.01, 7.00, 10.01 and 12.45 or 1.68, 4.01. 6.18. 9.86, and 12.45), automatic or manual temperature compensation, temperature selectable in either °F or °C, display Hold, and water-resistant membrane keypad. 

Previous calibration points, electrode slope and offset, and conductivity/TDS cell constants are stored in memory for quick and easy retrieval. You can also store up to 100 data sets in the meter’s memory for retrieval later. The convenient pull-out quick reference card keeps keypad functions at your fingertips.

What’s Included:

universal 100/240 VAC power supply, power adapters, and electrode stand.

Meter with probes adds: combination pH electrode (35805-04) and conductivity/temperature probe (35608-74).